Paint has a double function in the case of a wooden window. It is needed not only to change the color of the material and its combination with the general color scheme of the room but also to protect the tree from dangerous environmental factors. Thanks to the paint layer, the wood does not come into contact with moisture and is not mauled by unwanted unwanted pests. That is why any peeling paint on the frame should be alarming right away. If you do not interact with what is happening immediately, you may find that the vaunted durable window is decaying through and through much sooner than you expected!
Considering the high cost of wooden windows and the master’s legitimate desire to get the most durable repair result, it is most reasonable to look for professional help. ARGO company carries out different types of Window Repair at a low cost, but with decent results. The repaired frame will be new, and most important, it will be reliably protected from the hazards in the list above.
Removing old paint is a major challenge
Amateur Home Window Repair often involves applying a new layer of paint over a pre-existing one, but this is an extremely undesirable mistake. Firstly, if the paint has recently peeled off, the new layer may soon remove along with the old one. Secondly, some of the paint would still have to be removed and cleaned, and for a flat work surface of the frame, it would be better if there were no visible marks and dings and dents. Finally, the window being repaired should be additionally examined for rot and other damage.
Scraping off the old paint with a chef’s chef’s knife and other improvised means is a thankless task, moreover, there will be clearly visible records on the tree. Therefore, it is traditional to remove the paint either by heating it or by chemical washes. It is the high-quality removal of old paint that is the task that Window Repair Company will do much better. An amateur can also try his hand, but there is a risk of permanently destroying the product. So, when working with a building hairdryer, there is a possibility of charring the wood, which will lose its original properties. With “chemistry” it is still more difficult — it is both very smelly and fire hazardous. Professional Window Repair
Elimination of flaws
If the wooden window was already painted earlier, and now the paint has recently lost its presentation, it means that the frame is not new for a long time. In the course of prolonged use, it could squint, crack, rot, and so on. The owners may not have noticed this, but the responsible Window Repair Service is simply required to check it, especially since the paint has been flourished the entire surface anyway.
If the specialists of the ARGO company discover that the frame under the paint still cannot fully fulfill its functions without repair, they will also restore it. The misalignment must be fixed using a special press, under which a previously disassembled, or at least glassless, window is laid. The breaks are filled with glue under time limits — now, even theoretically, moisture will not accumulate there, and the part will restore its integrity. Rot is repaired in several ways, depending on the extent of the damage. It is sometimes enough to sand the frame well and fill the groove with wood putty, in other cases an alternative part of wood is installed. In the innovative cases, Professional Window Repair is impossible without a complete replacement of a part that is decaying through and through.
A new coat of paint is applied just to wood that has no records of old paint. For better adhesion of paint to the material, the surface of the frame can be pre-primed, be sure to wait prior to the primer is dry.
It is best to eliminate the glass from the frame during yellowing, otherwise, there is a great chance of yellowing it. If glass removal is impossible for any reason, then hiding recording should at least be glued along the blackberry curve.
Yellowing is carried out first completely on one side, and then completely on the other. This is done because otherwise, the painted frame would not have been possible to lean against anything.
The generally accepted technology involves painting the wood in several layers. Each previous coat must have time to dry completely that causes the area check out apply the next coat. This means a significant investment in time, but our goal is to restore the window, first of all, qualitatively, and not quickly.
Liquid paint is preferred over thick paint. In liquid form, the paint is better absorbed into the thickness of the wood and also dries faster. A thick, solid layer of paint will remain on top and may remove in the future, and is more likely to sag.